What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 18.06.2025 01:39

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
The third is lightning and “how it gets conducted into a home.”
This is 'the assistant's answer'
What is the sluttiest thing your wife has ever done?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
He then describes the function of a fuse.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
At least they know the answer if they wanted it.
Upvotes:
This is where this question deviates from being a 'generic' question, and becomes more specific.
My friend asked my crush and he said my crush hates me but not in a rude way. What does that mean?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
What is the sum of X+XX+XXX+XXXX?
One is “what exactly is in a ‘surge protector’ ? ”
There are two important concepts here.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
George, Charlotte ,and Louis Are the Royal Family’s Salvation - The Daily Beast
Barnstars:
A circuit breaker is similar, but is resettable.
The MOV will conduct when the voltage exceeds 50% of line voltage.
What celebrity do you admire the most?
At one ohm, the resistor has a maximum of 1 watt power.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
In schematic diagrams this is the symbol for a fuse:
One
He then asserts :
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
How can people balance religious beliefs with seeking professional mental health care?
(Dc diagram shown, AC is similar).
[image of Common-mode choke]
nine
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
2024–10–10[John johnson John Johnson ]
Is Veuve Clicquot Brut a good champagne?
a photo is worth a thousand words.
For this case there are devices called Metal oxide varistors (MOV).
I post the exact comment here.
Why do I sweat so much after shower?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
An AC voltage/ current source, and an ac inductive load.
He then describes Rainy Season and Lightning.
Why do people stop working towards achieving their dreams?
There are three different concepts here that are getting confused.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Now when you have a certain ac resistance, then a current flows in a loop.
Why do I like to eat my own cum?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Because the load is inductive, the current lags the voltage.(by a bit).
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
This is the picture of an electronic coil of wire wound around a core of magnetic material.
What are the pros and cons of living in Male, Maldives?
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
These devices are installed between the “hot” and “neutral” and protective ground.
But it can get overloaded, and no longer works.
but I think this circuit , shows a few more pieces.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
What does a fuse do?
This device then solves the entire problem.
Edit 2024–10.
2024–10–16 [ OO OLAOYE OYEBODE ]
So, the voltage could go up to 500 volts, and the fuse will not open up.
A fuse is a non-resetable over current circuit protector.
[old diagram got deleted by accident]
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
but this device (an Inductor) … impedes the rapid changes in the current.
The other is “what does a “fuse” do?”
It seems Mohan does not understand the difference between a comment and an Answer.
The bolt then partially travels down the line to your home.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Here is a simplified AC power diagram.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
What is lightning?
eight
But… the neutral is now “floating” because of the 1 ohm resistance.
First Sentence:
This one hit behind the barn.
the problem then depends on "how fast does the fuse operate?".
This is where the MOV conducts again, and dissipated the energy.
It also is a device that limits the change in current flow.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
2024–10–14 [Omar Gharbi Omar Gharbi ]
These are simplified answers to the original question, and does not change anything I wrote above.
what exactly is a ‘surge’ protector?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
so, what happens?
Can the fuse protect the electronic devices from lightning instead of a surge protector.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.